
This alternator is modified for motorsport demand and splash protected. The stator windings are handmade and optimized for higher current output; the rotor is extra fine balanced and impregnated. Modifications are available on request.
Features
- >140 A
- 3,400 g
- Clockwise rotation
- Lightweight aluminum pulley
- Multifunctional regulator
Application
Ambient temperature range | -30 to 90°C |
Vibration protection | high |
Installation without rubber mounting |
Technical Specifications
Mechanical Data
Case material | Aluminum |
Weight | 3,400 g |
Current regulator unit | integrated |
Max. rotations | 18,000 x 1/min |
Diameter | 108 mm |
Length without shaft stub | 128 mm |
Distance between mounting points | 154 mm |
Electrical Data
Rated current | >140 A |
Output voltage | 13.5 V |
Cut-in speed | 3,000 x 1/min |
Coupling | screws |
Battery B+ | M6 |
Tightening torque at B+ | 14 Nm |
Control lamp D+ | flat-pin connector, see drawing |
Characteristic
Rpm [1/min] | IG [A] at 90°C |
2,000 | 0 |
2,500 | 6 |
3,000 | 32 |
3,500 | 51 |
4,000 | 63 |
5,000 | 80 |
6,000 | 90 |
7,000 | 98 |
8,000 | 105 |
9,000 | 111 |
10,000 | 116 |
12,000 | 121 |
15,000 | 127 |
18,000 | 131 |

Installation Notes
Typical lifetime before service: max. 6,000 km / 30 h |
For application with severe conditions and/or high volume, please contact your Bosch Motorsport counterpart in order to define the most appropriate validation program. |
An external cooling can contribute to increase the performance. It will only be effective if the incoming air is 30°Kelvin cooler than the ambient air. Otherwise, the restriction of airflow will negate any cooling benefits. If these conditions are met, the cooling air should be distributed over the center axis at the rear of the alternator for optimal cooling. The alternator fans are not able to generate negative pressure. It is possible to use external blower to support the alternator. Debris at alternator cooling area can reduce cooling effect. This could also shorten the alternator service life. Installation without rubber mounting. |
Ordering Information
Alternator B0
Order number: F02U.V02.996-01