Pressure Sensor Air PSP

This sensor is designed to measure absolute air-pressure, especially the air box pressure of gasoline or Diesel engines.

An integrated circuit combines a piezo-resistive sensor element and an electronic for signal-amplification and temperature compensation. The output of the sensor is an analog, ratio metric signal.

The main feature and benefit of this sensor is the combination of both high quality production part and motorsport connector.

Features

  • Application: 0.2 to 3.0 bar
  • Response time: 0.2 ms
  • Pressure reference type: Absolut
  • Power supply: 5 V
  • Weight: 17 g

Application

Application

0.2 to 3 bar (a)

Pressure reference type

absolute

Max. pressure

5 bar

Operating temp. range

-40 to 125°C

Media temp. range

-40 to 125°C

Storage temp. range

-40 to 130°C

Max. vibration

0.19 mm at 100 to 200 Hz
250 m/s2 at 200 to 500 Hz

Technical Specifications

Mechanical Data

Mounting

M6

Fitting

12.05 mm

Weight w/o wire

17 g

Sealing

O-ring 7.59 x 2.62 mm

Electrical Data

Power supply US

4.5 to 5.5 V

Max power supply US max

16 V

Full scale output UA at 5 V

0.3 to 4.8 V

Current IS

9 mA

Characteristic

Response time T10/90

0.2 ms

Compensated range

10 to 85°C

Tolerance (FS) at US = 5 V

± 0.042 bar

Tolerance (FS)

± 1.4 %

Sensitivity

1,518 mV/bar

Offset

96 mV

Tolerance

Expansion of Tolerance

Connectors and Wires

Connector

ASL 6-06-05PC-HE

Mating connector

ASL 0-06-05SC-HE

F 02U 000 228-01

Pin 1

-

Pin 2

Gnd

Pin 3

Sig

Pin 4

US

Pin 5

-

Various motorsport and automotive connectors are available on request.

Sleeve

DR-25

Wire size

AWG 24

Wire length L

15 to 100 cm

Please specify the required wire length with your order.

Installation Notes

The PSP is designed for engines using ROZ95, ROZ98, M15, E22 and Diesel.

The sensor can be connected directly to most control units.

To avoid noise, an ECU-input circuit with a RC-low pass filter (tau = 2 ms) is recommended.

Use engine oil (5W40) as O-Ring grease (no silicone based grease).

Avoid miss-pinning (max. 5 minutes at I = 0.3 A).

Please find further application hints in the offer drawing and free download of the sensor configuration file (*.sdf) for the Bosch Data Logging System at our homepage.

To avoid damage caused by condensate the maximum mounting position from vertical is +-60°.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Pressure Sensor Air PSP

Order number: B 261 209 690-01

Downloads