
The display DDU 10 integrates a programmable full color dashboard display with a data logging system for motorsport applications. Additional input devices can be connected via Ethernet, CAN buses and RS 232.
Data Analysis Software WinDarab is available free of charge as “WinDarab V7 free” on our website. A basic logging function of 100 channels with recording of 50 ms (3 GB) is always included. The logger can be upgraded to full logging performance (max. 1 ms). In addition a 2nd logging partition of 1 GB can be activated.
With the DDU 10, a completely new library of graphical elements for the individual design of display pages was implemented and an all-new user interface menu has been developed for the device. A configurable input activates the menu structure and the user can reset for example laptime, fuel consumption and many more, without having to connect a laptop to the DDU. The user can also install own graphics, pictures etc. on the 12 freely configurable display pages. For quick data transfer from the car, e.g. during pit stop, data copy to a USB stick is available as an option.
Features
- Features new user interface menu
- All new display element design generator
- 10 additional LEDs on both sides of the device
- Supports GPS laptrigger, pre-dated lap time etc.
- Page change based on events possible
Application
Display |
| |
Resolution | 800 x 480 pixel | |
Supported image file formats | PNG, BMP, JPG, GIF | |
Processor | 667 MHz Dual Core | |
Converters | 8 kHz AD converters with digital low pass filter | |
Internal power source | Li/Ion capacitor | |
Configurable math channels |
| |
User configurable CAN in/out messages | Up to 256 IDs (128 in and out) | |
Sampling rate | 50 ms standard, | |
Online data compression |
| |
Logging rate | Max. 600 kB/s | |
Recording channels | 100 channels standard, | |
Logged data download speed | Max. 1,000 kB/s | |
Internal storage capacity | 3 GB standard, | |
Ambient light sensor |
| |
LTE Ethernet telemetry support, GSM telemetry support | ||
RS232 for GPS and telemetry |
| |
CCP-Master, data acquisition from ECU that support CAN calibration protocol (optional) |
Technical Specifications
Mechanical Data
Size | 198 x 134 x 35 mm |
Weight | 875 g |
Protection classification | IP67 |
Operating temperature internal | -20 to 85°C |
Max. vibration | Vibration profile 1 (see Appendix or www.bosch-motorsport.com) |
Electrical Data
Supply voltage | 6 to 18 V |
Current consumption (without sensor supply) | 2 A (at 12 V) |
Inputs
Analog channels | 4 standard, |
Input range | 0 to 5 V |
Resolution | 12 bit |
Switchable pull up resistor | For all analog inputs |
Wheel speed inputs | 4 Hall-effect or DF11, switchable |
Outputs
Sensor supply 5 V ± 1 % (250 mA) | 2 |
Sensor supply 10 V ± 1 % (250 mA) | 1 |
Sensor supply U_Bat (250 mA) | 1 |
Sensor ground | 4 |
Environment
External switch for page selection, 12 steps | B 261 209 658-01 |
External switch for brightness adjustment or page selection, 6 steps | B 261 209 659-01 |
Optional Upgrades
USB Kit | Rugged USB flash drive Bosch File System (BFS) format included, works with Bosch File System (BFS) preformatted USB Flash drive only Adapter cable to USB-Port Adapter for wiring harness SW license USB-Port unlocked |
CCP_MASTER | CCP-Master (ASAP2 file from ECU manufacturer required) |
FULL_LOG_1 | Enable full logging performance of 3 GB partition 1 |
FULL_LOG_2 | Enable full logging performance of 1 GB partition 2 |
I_O EXTENS | Enable additional 12 analog inputs and 2 CAN channels |
Connectors and Wires
Live connector on display |
|
Mating connector | F 02U 000 466-01 |
Auxiliary connector on display |
|
Mating connector | F 02U 000 443-01 |
Pin Configuration
Live connector | |||
---|---|---|---|
Pin | Name | Comment | Status |
1 | KL_31 |
| Incl. |
2 | KL_15 |
| Incl. |
3 | KL_30 |
| Incl. |
4 | Rev_In_3 | Hall or DF11 switchable | Incl. |
5 | Rev_In_1 | Hall or DF11 switchable | Incl. |
6 | KL_31 |
| Incl. |
7 | CAN_2_L | CAN speed selectable | Incl. |
8 | Ethernet_2_TXP |
| Incl. |
9 | Ethernet_2_TXN |
| Incl. |
10 | Sens_Power_12V | over current protected | Incl. |
11 | Rev_In_4 | Hall or DF11 switchable | Incl. |
12 | Rev_In_2 | Hall or DF11 switchable | Incl. |
13 | Laptrigger_In |
| Incl. |
14 | CAN_2_H | CAN speed selectable | Incl. |
15 | CAN_1_H | CAN speed selectable | Incl. |
16 | Ethernet_2_RXP |
| Incl. |
17 | Sens_Gnd_4 | fused | Incl. |
18 | Sens_Power 5V | over current protected | Incl. |
19 | ANA_IN_3 | 3.01 kOhm switchable | Incl. |
20 | ANA_IN_4 | 3.01 kOhm switchable | Incl. |
21 | Time_Sync | connection to Bosch ECU | Incl. |
22 | CAN_1_L | CAN speed selectable | Incl. |
23 | Ethernet_screen |
| Incl. |
24 | Ethernet_2_RXN |
| Incl. |
25 | Sens_Gnd_3 | fused | Incl. |
26 | Sens_Power 5V | over current protected | Incl. |
27 | ANA_IN_7 | 3.01 kOhm switchable | Opt. |
28 | ANA_IN_1 | 3.01 kOhm switchable | Incl. |
29 | USB_Device_DP | to Bosch USB stick | Opt. |
30 | RS232_TX_Telemetry |
| Incl. |
31 | Ethernet_1_TXP |
| Incl. |
32 | Sens_Gnd_2 | fused | Incl. |
33 | Sens_Power_10V | over current protected | Incl. |
34 | ANA_IN_8 | 3.01 kOhm switchable | Opt. |
35 | ANA_IN_10 | 3.01 kOhm switchable | Opt. |
36 | USB_Device_Gnd | to Bosch USB stick | Opt. |
37 | USB_Device_DN | to Bosch USB stick | Opt. |
38 | RS232_RX_Telemetry | e.g. GSM telemetry | Incl. |
39 | Ethernet_1_TXN |
| Incl. |
40 | Sens_Gnd_1 | fused | Incl. |
41 | ANA_IN_11 | 3.01 kOhm switchable | Opt. |
42 | ANA_IN_9 | 3.01 kOhm switchable | Opt. |
43 | RS232_TX_GPS |
| Incl. |
44 | ANA_IN_16 | 3.01 kOhm switchable | Opt. |
45 | USB_Device_Power | to Bosch USB stick | Opt. |
46 | Ethernet_1_RXP |
| Incl. |
47 | ANA_IN_12 | 3.01 kOhm switchable | Opt. |
48 | ANA_IN_6 | 3.01 kOhm switchable | Opt. |
49 | ANA_IN_2 | 3.01 kOhm switchable | Incl. |
50 | ANA_IN_13 | 3.01 kOhm switchable | Opt. |
51 | ANA_IN_15 | 3.01 kOhm switchable | Opt. |
52 | Ethernet_1_RXN |
| Incl. |
53 | ANA_IN_5 | 3.01 kOhm switchable | Opt. |
54 | RS232_RX_GPS | for GPS sensor input | Incl. |
55 | ANA_IN_14 | 3.01 kOhm switchable | Opt. |
Auxiliary connector | |||
---|---|---|---|
Pin | Name | Comment | Status |
1 |
| Unused |
|
2 |
| Unused |
|
3 |
| Unused |
|
4 |
| Unused |
|
5 |
| Unused |
|
6 |
| Unused |
|
7 |
| Unused |
|
8 |
| Unused |
|
9 | Ethernet_3_TXP |
| Incl. |
10 | Ethernet_3_RXP |
| Incl. |
11 | Ethernet_3_RXN |
| Incl. |
12 | CAN_4_H |
| Opt. |
13 |
| Unused |
|
14 |
| Unused |
|
15 |
| Unused |
|
16 |
| Unused |
|
17 |
| Unused |
|
18 | Ethernet_screen |
| Incl. |
19 | Ethernet_3_TXN |
| Incl. |
20 | CAN_4_L |
| Opt. |
21 | CAN_3_H |
| Opt. |
22 | CAN_3_L |
| Opt. |
Installation Notes
Inspection services recommended after 220 h or 2 years, no components to replace. |
This product may contain open source software. Information about license terms and other obligations is given in the manual. |
Ordering Information
Display DDU 10
Order number: F 02U V02 659-01
CAN Keypad CK-M12
Order number: F 02U V0U 328-02
Accessories
USB Kit for C 70, DDU 9, DDU 10 and VCU
Order number: F 02U V02 214-01
Vehicle Loom Basic
Order number: F 02U V02 735-01
Bench Loom
Order number: F 02U V02 349-01
Software Options
CCP_MASTER
Order number: F 02U V02 213-01
FULL_LOG_1
Order number: F 02U V02 304-01
FULL_LOG_2
Order number: F 02U V02 305-01
I_O EXTENS
Order number: F 02U V02 205-01