
The MSI 60 is a high quality signal conditioning and data acquisition unit for analogue, digital, frequency and linear variable differential (LVDT) sensors.
MSI 60 offers a large number of freely configurable inputs (32 x differential analogue, 8 x single ended analogue, 8 x LVDT, 2 x frequency, 1 x RS 232 for GPS). Possible applications of the differential inputs include e.g. 31 TC-J type or TC-K type temperature sensors arranged in a sensor array (one diff. input used for compensation), PT100, PT1000 (specific pull up values available), NTC, strain gauges etc. Each differential input features 200 times oversampling.
The cut-off frequency of the digital filters in all inputs is automatically adjusted to match the acquisition rate. MSI 60 also corrects the latency of the digital filters during recording, yielding zero filter delay in the recorded data. Quantization of each MSI measurement channel is individually configurable. Data can be sent via Ethernet interface to any Bosch Motorsport logging device.
Features
- 50 sensor inputs (differential analogue, single ended analogue, LVDT, frequency, RS232)
- High quality signal processing
- Compact dimensions
Technical Specifications
Mechanical Data
Size | 153 x 119 x 38 mm |
Weight | 645 g |
Aluminum housing |
|
High density type motorsport connectors | |
Vibration damped printed circuit boards | |
Operating temperature | -20 to 85°C |
Max. vibration | 15 g sinus at 1,200 Hz for t < 5 h |
Electrical Data
Max. power consumption | 15 W |
Required power supply | 7 to 18 V |
2 frequency inputs 0 to 25.5 kHz for inductive sensor / Hall-effect sensor / DF11 sensor | |
32 differential analogue inputs, switchable to single ended operation, -5 V to 5 V or 0 V to 5 V; switchable pull up values 3.01 kOhm and 4.99 kOhm, 49.9 kOhm to suit PT100/PT1000 | |
8 single ended analogue inputs, 0 V to 5 V; switchable pull up value 3.01 kOhm | |
8 LVDT inputs, 2.5 kHz/5 kHz/10 kHz; 3 V/5 V/10 V RMS | |
4 PWM outputs, max. 1 A each, max. 1 kHz | |
2 x 5 V or 10 V switchable sensor power supply, max. 200 mA each | |
2 x 5 V sensor power supply, max. 400 mA each | |
1 x sensor power supply, max. 800 mA voltage = (MSI 60 supply voltage) -1.1 V; switched U_Batt | |
RS 232 interface for GPS (data reception only) | |
3 x Ethernet 100 MBit/s |
|
2 x freely configurable up to 1 MBit CAN Bus |
Environment
Software Upgrade 1 | |
CCP-Master (ASAP 2 file from ECU manufacturer required) | F 02U V01 012-01 |
Connectors and Wires
Connector LIVE (red) | AS212-35PN |
Mating Connector | AS612-35SN; max. AWG22 |
Connector SENSOR 1 (yellow) | ASDD214-64PA |
Mating Connector | ASDD614-64SA; |
Connector SENSOR 2 (red) | ASDD214-64PN |
Mating Connector | ASDD614-64SN; |
Ordering Information
Modular Sensor Interface MSI 60
Order number: F 02U V01 901-01
Software Options
SW Upgrade 1
Order number: F 02U V01 012-01