ps_skip_to_main

Display DDU 10

Display DDU 10

The Display DDU 10 integrates a programmable full colour dashboard display with a data logging system for motorsport applications. Additional input devices can be connected via Ethernet, CAN buses, and RS 232.

Data Analysis Software WinDarab is available free of charge as “WinDarab V7 free” on our website. A basic logging function of 100 channels with recording of 50 ms (4 GB) is always included. The logger can be upgraded to full logging performance (max. 1 ms). In addition, a 2nd logging partition of 4 GB can be activated.

With the DDU 10, a completely new library of graphical elements for the individual design of display pages was implemented and an all-new user interface menu has been developed for the device. A configurable input activates the menu structure and the user can reset for example laptime, fuel consumption and many more, without having to connect a laptop to the DDU. The user can also install own graphics, pictures etc. on the 12 freely configurable display pages. For quick data transfer from the car, e.g. during pit stop, data copy to a USB stick is available as an option.

Product Highlights

Features

  • Features user interface menu
  • Features display element design generator
  • 10 top-LEDs and 5 side-LEDs on both sides
  • Supports GPS laptrigger, pre-dated lap time etc.
  • Page change based on events possible

Downloads

Literature


Software

Product Details

Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Resolution
800 x 480 pixel
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Supported image file formats
PNG, BMP, JPG, GIF
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Processor
667 MHz Dual Core
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Converters
10 kHz 12 bit AD converters with digital low pass filter
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Internal power source
Li/Ion capacitor
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Configurable math channels
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
User configurable CAN in/out messages
Up to 256 IDs (128 in and out)
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Online data compression
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Internal logger
  • 4 GB memory on Partition 1 enabled
  • 100 channels enabled
  • 50 ms Sampling rate enabled
  • FULL_LOG_1 (1,500 channels/1 kHz sampling rate on Partition 1) optional
  • FULL_LOG_2 (4 GB memory on Partition 2) optional
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Logging rates
  • Usage of all features: 600 kB/s
  • Primary logging use case: 800 kB/s
  • Logging data download rate: up to 4 MB/s
Display
7” graphic color display
12 user configurable display pages
20 multicolor freely configurable (RGB) LEDs
Ambient light sensor
Mechanical Data
Mechanical Data
Size
198 x 134 x 35 mm
Mechanical Data
Weight
875 g
Mechanical Data
Protection classification
IP67
Mechanical Data
Operating temperature internal
-20 to 85°C
Mechanical Data
Max. vibration
Vibration profile 1 (see Downloads or bosch-motorsport.com)
Electrical Data
Electrical Data
Supply voltage
6 to 18 V
Electrical Data
Current consumption (w/o sensor supply)
2 A (at 12 V)
Inputs
Inputs
4 x analog channels, plus 12 optional
Inputs
0 to 5 V input range
Inputs
12 bit resolution
Inputs
Switchable pull up resistors for all analog inputs
Inputs
4 x Hall-effect or DF11 wheel speed inputs, switchable
Sensor Supplies and Screens
Sensor Supplies and Screens
2 x Sensor supply 5 V ± 1 % (250 mA)
Sensor Supplies and Screens
1 x Sensor supply 10 V ± 1 % (250 mA)
Sensor Supplies and Screens
1 x Sensor supply U_Bat (250 mA)
Sensor Supplies and Screens
4 x Sensor ground
Environment
Environment
External switch for page selection, 12 steps
B 261 209 658-01
Environment
External switch for brightness adjustment or page selection, 6 steps
B 261 209 659-01
Connectors and Wires
Connectors and Wires
LIFE connector on display
AS216-35PN
Connectors and Wires
Mating connector
AS616-35SN
F02U.000.466-01
Connectors and Wires
Auxiliary connector on display
AS212-35PN
Connectors and Wires
Mating connector
AS612-35SN
F02U.000.443-01
Pin Configuration
Pin Configuration
Pin Configuration
LIFE connector
Pin Configuration
Pin
Name
Comment
Status
Pin Configuration
1
KL_31
Incl.
Pin Configuration
2
KL_15
Incl.
Pin Configuration
3
KL_30
Incl.
Pin Configuration
4
Rev_In_3
Hall or DF11 switchable
Incl.
Pin Configuration
5
Rev_In_1
Hall or DF11 switchable
Incl.
Pin Configuration
6
KL_31
Incl.
Pin Configuration
7
CAN_2_L
CAN speed selectable
Incl.
Pin Configuration
8
Ethernet_2_TXP
Incl.
Pin Configuration
9
Ethernet_2_TXN
Incl.
Pin Configuration
10
Sens_Power_12V
over current protected
Incl.
Pin Configuration
11
Rev_In_4
Hall or DF11 switchable
Incl.
Pin Configuration
12
Rev_In_2
Hall or DF11 switchable
Incl.
Pin Configuration
13
Laptrigger_In
Incl.
Pin Configuration
14
CAN_2_H
CAN speed selectable
Incl.
Pin Configuration
15
CAN_1_H
CAN speed selectable
Incl.
Pin Configuration
16
Ethernet_2_RXP
Incl.
Pin Configuration
17
Sens_Gnd_4
fused
Incl.
Pin Configuration
18
Sens_Power 5V
over current protected
Incl.
Pin Configuration
19
ANA_IN_3
3.01 kOhm switchable
Incl.
Pin Configuration
20
ANA_IN_4
3.01 kOhm switchable
Incl.
Pin Configuration
21
Time_Sync
connection to Bosch ECU
Incl.
Pin Configuration
22
CAN_1_L
CAN speed selectable
Incl.
Pin Configuration
23
Ethernet_screen
Incl.
Pin Configuration
24
Ethernet_2_RXN
Incl.
Pin Configuration
25
Sens_Gnd_3
fused
Incl.
Pin Configuration
26
Sens_Power 5V
over current protected
Incl.
Pin Configuration
27
ANA_IN_7
3.01 kOhm switchable
Opt. 1*
Pin Configuration
28
ANA_IN_1
3.01 kOhm switchable
Incl.
Pin Configuration
29
USB_Device_DP
to Bosch USB stick
Opt. 2*
Pin Configuration
30
RS232_TX_Telemetry
Transmit Telemetry data
Incl.
Pin Configuration
31
Ethernet_1_TXP
Incl.
Pin Configuration
32
Sens_Gnd_2
fused
Incl.
Pin Configuration
33
Sens_Power_10V
over current protected
Incl.
Pin Configuration
34
ANA_IN_8
3.01 kOhm switchable
Opt. 1*
Pin Configuration
35
ANA_IN_10
3.01 kOhm switchable
Opt. 1*
Pin Configuration
36
USB_Device_Gnd
to Bosch USB stick
Opt. 2*
Pin Configuration
37
USB_Device_DN
to Bosch USB stick
Opt. 2*
Pin Configuration
38
RS232_RX_Telemetry
Receive Telemetry data
Incl.
Pin Configuration
39
Ethernet_1_TXN
Incl.
Pin Configuration
40
Sens_Gnd_1
fused
Incl.
Pin Configuration
41
ANA_IN_11
3.01 kOhm switchable
Opt. 1*
Pin Configuration
42
ANA_IN_9
3.01 kOhm switchable
Opt.
Pin Configuration
43
RS232_TX_GPS
Transmit GPS data
Incl.
Pin Configuration
44
ANA_IN_16
3.01 kOhm switchable
Opt. 1*
Pin Configuration
45
USB_Device_Power
to Bosch USB stick
Opt. 2*
Pin Configuration
46
Ethernet_1_RXP
Incl.
Pin Configuration
47
ANA_IN_12
3.01 kOhm switchable
Opt. 1*
Pin Configuration
48
ANA_IN_6
3.01 kOhm switchable
Opt. 1*
Pin Configuration
49
ANA_IN_2
3.01 kOhm switchable
Incl.
Pin Configuration
50
ANA_IN_13
3.01 kOhm switchable
Opt. 1*
Pin Configuration
51
ANA_IN_15
3.01 kOhm switchable
Opt. 1*
Pin Configuration
52
Ethernet_1_RXN
Incl.
Pin Configuration
53
ANA_IN_5
3.01 kOhm switchable
Opt. 1*
Pin Configuration
54
RS232_RX_GPS
Receive GPS data
Incl.
Pin Configuration
55
ANA_IN_14
3.01 kOhm switchable
Opt. 1*
Auxiliary connector
Auxiliary connector
Pin
Name
Comment
Status
Auxiliary connector
1
Unused
Auxiliary connector
2
Unused
Auxiliary connector
3
Unused
Auxiliary connector
4
Unused
Auxiliary connector
5
Unused
Auxiliary connector
6
Unused
Auxiliary connector
7
Unused
Auxiliary connector
8
Unused
Auxiliary connector
9
Ethernet_3_TXP
Incl.
Auxiliary connector
10
Ethernet_3_RXP
Incl.
Auxiliary connector
11
Ethernet_3_RXN
Incl.
Auxiliary connector
12
CAN_4_H
Opt. 1*
Auxiliary connector
13
Unused
Auxiliary connector
14
Unused
Auxiliary connector
15
Unused
Auxiliary connector
16
Unused
Auxiliary connector
17
Unused
Auxiliary connector
18
Ethernet_screen
Incl.
Auxiliary connector
19
Ethernet_3_TXN
Incl.
Auxiliary connector
20
CAN_4_L
Opt. 1*
Auxiliary connector
21
CAN_3_H
Opt. 1*
Auxiliary connector
22
CAN_3_L
Opt. 1*

Opt. 1*: Requires Software Upgrade IO_EXTENS

Opt. 2*: Requires Software Upgrade DATA_USB

.
.

Further Information

CAN interfaces
2 standard,
plus 2 optional
CAN interfaces
Ethernet 100BaseT
2 standard,
plus 2 optional
3
CAN interfaces
Laptrigger input
2 standard,
plus 2 optional
1
CAN interfaces
RS232
2 standard,
plus 2 optional
Telemetry, GPS
CAN interfaces
Configuration via RaceCon
2 standard,
plus 2 optional
Over Ethernet or MSA-Box II
CAN interfaces
CCP-Master, data acquisition from ECU that support CAN calibration protocol (optional)
2 standard,
plus 2 optional
Maintenance Interval: 220 h or a maximum of two years
Maintenance Interval: 220 h or a maximum of two years
This product may contain open source software. Information about license terms and other obligations is given in the manual.

Display DDU 10
Order number: F02U.V02.659-03

Rugged USB flash drive
Order number: F02U.V03.534-01

Connector for USB flash drive on car loom side
Order number: F02U.002.996-01

Adapter cable to PC USB-Port
Order number: F02U.V01.343-01

Software Options

CCP/XCP_MASTER
Order number: F02U.V02.213-01

FULL_LOG_1
Order number: F02U.V02.304-01

FULL_LOG_2
Order number: F02U.V02.305-01

IO_EXTENS
Order number: F02U.V02.205-01

DATA_USB
Order number: F02U.V03.476-01

Accessories

CAN Keypad CK-M12
Order number: F02U.V0U.328-04

Vehicle Loom Basic
Order number: F02U.V02.735-01

Bench Loom
Order number: F02U.V02.349-01

CCP/XCP_MASTER
CCP/XCP_MASTER
Enables CCP/XCP master functionality to request data from foreign devices via CAN/CCP protocol, XCP over Ethernet (UDP) or XCP via CAN.
(ASAP2 file from ECU manufacturer required)
FULL_LOG_1
FULL_LOG_1
1,500 channels/1 kHz sampling rate on Partition 1
FULL_LOG_2
FULL_LOG_2
4 GB memory on Partition 2
IO_EXTENS
IO_EXTENS
Additional 12 analog inputs and 2 CAN channels
DATA_USB
DATA_USB
Data copy to USB flash drive
ABSDIAG
ABSDIAG
Upgrade Onboard Diagnostic Package ABS M5
  • Enables functionality like error memory read and erase, and repair bleed from UIM menu in display

Generally blocked are direct and indirect business involving high risk destinations, including Russia, Belarus, Cuba, Iran, North Korea, Syria, Libya, Afghanistan, and certain non-governmental controlled Ukrainian regions. This list may change as geopolitics evolve.