ps_skip_to_main

Ignition Coil P65-T

Ignition Coil P65-T

This single fire coil is a low cost concept designed for direct mounting on the cylinder head.

The coil P65-T has an integrated transistor and requires an ECU with internal ignition drivers.

Product Highlights

Features

  • Max. 33 kV
  • Min. 65 mJ
  • Max. 10,000 1/min (with reduced dwell time)
  • Developed for GDI engines

Downloads

Literature

Product Details

Spark energy
≥ 65 mJ
Spark energy
Primary current
≥ 65 mJ
≤ 7.0 A
Spark energy
Operating temperature range at outer core
≥ 65 mJ
-40 to 140°C
Spark energy
Storage temperature range
≥ 65 mJ
-40 to 140°C
Spark energy
Max. vibration
≥ 65 mJ
≤ 480 m/s2at 5 to 2,000 Hz
Mechanical Data
Mechanical Data
Length
143 mm
Mechanical Data
Weight
223 g
Mechanical Data
Mounting
Screw fastening
Mechanical Data
Fits to spark plugs with a ceramic diameter of 10 mm
Electrical Data
Electrical Data
Primary resistance with wire
Incapable of measurement
Electrical Data
Secondary resistance
Incapable of measurement
Electrical Data
High voltage rise time
≤ 1.4 kV/µs
Electrical Data
Max. high voltage at
1 MOhm || 10 pF
≤ 33 kV
Electrical Data
Spark current
≤ 70 mA
Electrical Data
Spark duration at 1 kV || 1 MOhm
≤ 1.85 ms
Electrical Data
Noise suppression
Inductive and 1 kOhm resistance
Electrical Data
Integrated suppression diode / EFU
Electrical Data
Integrated power stage
Characteristic
Characteristic
Measured with power stage
BIP 385
Connectors and Wires
Connectors and Wires
Connector
Tyco 0-1488991-1
Connectors and Wires
Mating connector
F02U.B00.555-01
Connectors and Wires
Pin 1
ECU ignition signal
Connectors and Wires
Pin 2
ECU GND
Connectors and Wires
Pin 3
Ubatt
Characteristic dwell times [ms]
Characteristic dwell times [ms]
U batt
I primary
Characteristic dwell times [ms]
5.0 A
5.5 A
6.0 A
6.5 A
7.0 A
7.5 A
Characteristic dwell times [ms]
Max.
1000
/min
10
9
8
7
6
5
Characteristic dwell times [ms]
6 V
10.7
11.6
Characteristic dwell times [ms]
8 V
4.7
5.4
6.8
8.3
10.2
Characteristic dwell times [ms]
10 V
3.1
3.55
4.25
4.87
5.6
6.3
Characteristic dwell times [ms]
12 V
2.32
2.66
3.12
3.51
3.94
4.36
Characteristic dwell times [ms]
14 V
1.86
2.1
2.45
2.75
3.07
3.36
Characteristic dwell times [ms]
16 V
1.55
1.77
2.03
2.26
2.51
2.73
Characteristic dwell times [ms]
16.5 V
1.49
1.7
1.95
2.17
2.40
2.61
Characteristic dwell times [ms]
18 V
1.34
1.51
1.73
1.92
2.13
2.31
Characteristic dwell times [ms]
20 V
1.16
1.33
1.51
1.67
1.85
2.0
Characteristic dwell times [ms]
24 V
0.93
1.05
1.19
1.32
1.45
1.57
Characteristic dwell times [ms]
Measured values are without loom resistance. Loom resistance must be less than the primary resistance. The needed dwell time is to be verified through current measurement
Dwell time
Spark energy and provided high voltage
Spark energy and provided high voltage
I prim.
Spark energy
-duration
-current
Hi voltage
Spark energy and provided high voltage
5 A
33.7 mJ
1.37 ms
50 mA
24.4 kV
Spark energy and provided high voltage
5.5 A
42 mJ
1.54 ms
54 mA
27.0 kV
Spark energy and provided high voltage
6 A
48.9 mJ
1.62 ms
59 mA
29.1 kV
Spark energy and provided high voltage
6.5 A
55.9 mJ
1.74 ms
63 mA
31.2 kV
Spark energy and provided high voltage
7 A
63.6 mJ
1.85 ms
68 mA
33.2V
Spark energy and provided high voltage
7.5 A
71.9 mJ
1.92 ms
73 mA
34.7 kV
Spark energy
See Offer Drawing for further information

Further Information

During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug.
The coil P65-T has an integrated transistor and requires an ECU with internal ignition drivers with 10 to 20 mA current output.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug.
For technical reasons the values of the coils may vary.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug.
Please regard the specified limit values.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug.
Please find further application hints in the offer drawing at our homepage.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug.
In case of ignition-caused malfunctions, please use screened sensor wires.
Design Note
Design Note
We strongly recommend the design of the spark plug shaft has to ensure that there are no sharp edges in the shaft geometry due to design or machining. Only in compliance with this recommendation, a proper function can be ensured.

Ignition Coil P65-T
Order number: 0221.604.024

Generally blocked are direct and indirect business involving high risk destinations, including Russia, Belarus, Cuba, Iran, North Korea, Syria, Libya, Afghanistan, and certain non-governmental controlled Ukrainian regions. This list may change as geopolitics evolve.