Pressure Sensor Fluid PSS-140
Product Highlights
Features
- Application: 0 to 140 bar
- Response time: 2 ms
- Pressure reference type: Absolut
- Power supply: 5 V
- Weight: 35 g
Downloads
Literature
Product Details
Application
|
Application
|
0 to 140 bar
|
|
Application
Max. pressure
|
0 to 140 bar
180 bar
|
|
Application
Sensitivity at US= 5 V
|
0 to 140 bar
28.57 mV/bar
|
|
Application
Pressure reference type
|
0 to 140 bar
absolute
|
|
Application
Operating and media temp. range
|
0 to 140 bar
-40 to 130°C (140°C)
|
|
Application
Storage temp. range
|
0 to 140 bar
-30 to 60°C
|
|
Application
Max. vibration
|
0 to 140 bar
210 m/s2at 147 to 1,350 Hz
175 m/s² at 1,350 to 2,000 Hz |
Technical Specification
|
Mechanical Data
|
|
|
Mechanical Data
Male thread
|
M10 x 1
|
|
Mechanical Data
Wrench size
|
27 mm
|
|
Mechanical Data
Installation torque
|
22 ± 2 Nm in aluminum
32.5 ± 2.5 Nm in steel |
|
Mechanical Data
Weight w/o wire
|
35.2 g
|
|
Mechanical Data
Sealing
|
sealed cone
|
|
Electrical Data
|
|
|
Electrical Data
Power supply US
|
4.75 to 5.25 V
|
|
Electrical Data
Max power supply USmax
|
16 V
|
|
Electrical Data
Full scale output UA
|
10 to 90 % USratiometric
|
|
Electrical Data
Current IS
|
12 mA
|
|
Characteristic
|
|
|
Characteristic
Load capacity
|
10 nF
|
|
Characteristic
Output resistance
|
10 Ohm
|
|
Characteristic
Tolerance (FS)
|
+ 1 % (0 to 100°C)
+ 1.5 % (-40 to 0°C and 100 to 130°C) |
|
Characteristic
Sensitivity
|
Please see Variations
|
|
Characteristic
Offset
|
500 mV at US= 5 V
|
|
Connectors and Wires
|
|
|
Connectors and Wires
Connector
|
Bosch Compact
|
|
Connectors and Wires
Mating connector
|
3-pole Compact
D261.205.366-01 |
|
Connectors and Wires
Pin 1
|
Gnd
|
|
Connectors and Wires
Pin 2
|
Sig
|
|
Connectors and Wires
Pin 3
|
US
|
Dimensions
Further Information
Installation Notes
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
|
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
The sensor has a protection for overvoltage, reverse polarity and short-circuit.
|
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
Please do not fix the sensor directly to the engine block to avoid undesired strong vibrations.
|
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
Each mounting orientation is possible.
|
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
Please consider using the adapter F02U.002.711-01.
|
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
The sensor meets all EMV, EMC and ESD automotive standards.
|
|
The PSS- can be connected directly to most control units. Please consider the TCI for the electrical connection of the sensor.
Please find further application hints in the offer drawing and free download of the sensor configuration file (*.sdf) for the Bosch Data Logging System at our homepage.
|
|
Safety Note
|
|
Safety Note
The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.
|
Ordering Information
Pressure Sensor Fluid PSS-140
Order number: 0261.545.053
Accessories
Adapter
Order number: F02U.002.711-01
Legal Restrictions
Generally blocked are direct and indirect business involving high risk destinations, including Russia, Belarus, Cuba, Iran, North Korea, Syria, Libya, Afghanistan, and certain non-governmental controlled Ukrainian regions. This list may change as geopolitics evolve.