Skip to main content

Vehicle Control Unit MS 50.4P incl. CCA and Multi-CCA

Vehicle Control Unit MS 50.4P incl. CCA and Multi-CCA

The VCU MS 50.4P incl. CCA and Multi-CCA is a highly powerful processing / logging unit for race applications.

Based on our broad base of platform function, we support you with customized VCU functions for a tailor-made solution.

In addition, you can quickly develop your individual customer software based on MATLAB/Simulink to significantly speed up algorithm development (automatic code and documentation generation) – including extensive simulation capabilities.

Product Highlights

Features

  • 866 MHz Dual Core Processor exclusively for vehicle control functionality (MATLAB based)
  • Identical, dedicated 866 MHz Dual Core Processor exclusively for logging purposes
  • High Speed Logging 200 kHz of 6 analog inputs (optional)
  • Event logging, Configurable pre-event logging

Downloads

Literature


Software

Product Details

Processor for customer code
866 MHz Dual Core
Processor for customer code
Processor for logger
866 MHz Dual Core
866 MHz Dual Core
Processor for customer code
Configurable math channels
866 MHz Dual Core
Processor for customer code
User configurable CAN in/out messages
866 MHz Dual Core
Processor for customer code
Online data compression
866 MHz Dual Core
Processor for customer code
Internal logger
  • 1,500 channels
  • FULL_LOG_1 (4 GB memory on Partition 1) enabled
  • PERF_LOG_1 (16 GB memory on Partition 1) optional
  • FULL_LOG_2 (4 GB memory on Partition 2) enabled
  • High Speed Logging Package (Sampling rate 5 µs) optional
  • DATA_USB (Data copy to USB flash drive) enabled
 866 MHz Dual Core
Processor for customer code
Logging rates
  • Usage of all features: 800 kB/s
  • Primary logging use case: >1,500 kB/s
  • Logging data download rate: up to 7.5 MB/s
 866 MHz Dual Core
Processor for customer code
LTE Ethernet telemetry support
866 MHz Dual Core
Processor for customer code
RS232 interface for GPS
866 MHz Dual Core
Processor for customer code
Customer Code Area CCA
Provides the option to run customer developed software code on Bosch device
866 MHz Dual Core
Processor for customer code
Multi CCA
Enables the use of an extra core to utilize more computing power in the device for running a second customer model
866 MHz Dual Core
Mechanical Data
Mechanical Data
Size
166 x 121 x 41 mm
Mechanical Data
Weight
≤ 660 g
Mechanical Data
Protection classification
IP67
Mechanical Data
3 motorsport connectors, 198 pins in total
Mechanical Data
Max. vibration
Vibration profile 1
Mechanical Data
Operating temperature internal
0 to 85°C
Mechanical Data
Operation outside the temperature limits can be tested on request during the manufacturing tests.
Electrical Data
Electrical Data
Supply voltage
5 to 18 V
Inputs
Inputs
20 Analog channels 0 to 5 V, 0.5 % precision between 0.2 and 4.8 V, switchable pull-up
Inputs
8 Digital PWM inputs f_max=30 kHz Hall-type speed measurement possible,
Switchable pullup 2.15 kOhm, (required for Hall), Tooth count differential*
Inputs
4 Digital PWM inputs f_max=30 kHz Hall- and DF11 type speed measurement possible,
Fixed pullup 2.15 kOhm (required for Hall), Tooth count differential*
Inputs
4 universal Thermocouple
Inputs
1 Bosch Laptrigger
Inputs
1 TimeSync master and slave (specific to Bosch measurement system)
Inputs
Internal measurements:
1 x ambient pressure
1 x ECU temperature
20 x supply voltage
20 x supply current
1 x battery voltage (external VCU supply)
1 x external VCU supply current
4 x HS output current
1 x 3-axis acceleration plus roll/pitch/yaw rate
Outputs
Outputs
2* x PWM High side; 7.5 A each, PWM, 50 Hz
Outputs
4* x PWM Low side; 2.2 A each, PWM, 10 kHz
Outputs
*can be enhanced by Upgrade I/O Package
Sensor Supplies and Screens
Sensor Supplies and Screens
5* x 12 V, 400 mA each
Sensor Supplies and Screens
5* x Switchable 5 V/12 V, 400 mA each
Sensor Supplies and Screens
4 A max overall current on all 12 V
2 A max overall current on all 5 V
Sensor Supplies and Screens
12 V ± 1 % precision on the pin
5 V ± 0.1 % precision on the pin
Sensor Supplies and Screens
20 x Sensor ground
Sensor Supplies and Screens
*can be enhanced by Upgrade I/O Package
Adaptation and Documentation
Adaptation and Documentation
Function documentation
Automatically created during code generation
Adaptation and Documentation
MatLab code generation
Support for customer own MatLab function development
Software Tools (free download)
Software Tools (free download)
Data Analysis tool WinDarab 7
Software Tools (free download)
System Configuration tool RaceCon
Logger configuration, calibration, and online measurement
Connectors
Connectors
Connector LIFE (red) AS018-35PN
Mating connector AS618-35SN (not included)
Connectors
Connector SENS-A (yellow) AS018-35PA
Mating connector AS618-35SA (not included)
Connectors
Connector SENS-B (blue) AS018-35PB
Mating connector AS618-35SB (not included)
.
.
.
.

Further Information

3 Ethernet 100 Mbit
3 Ethernet 100 Mbit
2 CAN + 2 CAN FD (+4 CAN FD with Upgrade I/O Package)
3 Ethernet 100 Mbit
1 LIN
3 Ethernet 100 Mbit
1 USB
3 Ethernet 100 Mbit
1 RS232 interface for GPS or Telemetry, switchable depending on SW version
3 Ethernet 100 Mbit
1 Time sync synchronization Ethernet
Maintenance Interval: 220 h or a maximum of two years
Maintenance Interval: 220 h or a maximum of two years
Please remember that the mating connectors and the programming interface MSA-Box II are not included and must be ordered separately.

Vehicle Control Unit MS 50.4P incl. CCA and Multi-CCA
Order number: F02U.V03.014-01

Rugged USB flash drive
Order number: F02U.V03.534-01

Connector for USB flash drive on car loom side
Order number: F02U.002.996-01

Adapter cable to PC USB-Port
Order number: F02U.V01.343-01

Breakout Box BOB 66-pole
Connector code: blue
Order number: F02U.V02.295-01

Breakout Box BOB 66-pole
Connector code: yellow
Order number: F02U.V02.298-01

Breakout Box BOB MS 7
Connector code: red
Order number: F02U.V02.293-01

Software Options

I/0 Package
Order number: F02U.V02.777-01

PERF_LOG_1
Order number: F02U.V03.054-01

High Speed Logging Package
Order number: F02U.V02.779-01

CCP/XCP_MASTER
Order number: F02U.V02.213-01

Accessories

Opening tool for shellsize 18
Order number: F02U.V01.394-01

I/O Package
I/O Package
Communication
I/O Package
4 CAN
I/O Package
Inputs
I/O Package
4 Analog channels
0 to 5 V,
0.5 % precision between 0.2 and 4.8 V, switchable pull-up
I/O Package
4 Digital PWM inputs
f_max=30 kHz
Hall-type speed measurement possible,
Fixed pullup 2.15 kOhm (required for Hall),
Tooth count differential**
I/O Package
4 LVDT, 5 pin configuration,
excitation frequency 1 to 20 kHz,
excitation voltage 0 to 5 V (rms)
I/O Package
Outputs
I/O Package
4 “TTL” Digital output, 10 kHz, PWM, 25 mA each
I/O Package
2 PWM High side; 7.5 A each, PWM, 50 Hz
I/O Package
4 PWM Low side; 2.2 A each, PWM, 10 kHz
I/O Package
Power Supplies
I/O Package
5 x12 V, 400 mA each
I/O Package
5 switchable 5 V/12 V, 400 mA each
I/O Package
** The tooth count differential between any two of the PWM inputs is available two measure e.g. shaft torsion.
PERF_LOG_1
PERF_LOG_1
Increase logging Partition 1 from 4 GB to 16 GB memory
High Speed Logging Package
High Speed Logging Package
6 ANA
0 to 5 V, 200 kHz logging rate
CCP/XCP_MASTER
CCP/XCP_MASTER
Enables CCP/XCP master functionality to request data from foreign devices via CAN/CCP protocol, XCP over Ethernet (UDP) or XCP via CAN.
(ASAP2 file from ECU manufacturer required)

Generally blocked are direct and indirect business involving high risk destinations, including Russia, Belarus, Cuba, Iran, North Korea, Syria, Libya, Afghanistan, and certain non-governmental controlled Ukrainian regions. This list may change as geopolitics evolve.