Skip to main content

Ignition Coil P65-TWG

Ignition Coil P65-TWG

This single fire coil is a low cost concept designed to connect a high voltage wire on the coil.

The coil has an integrated transistor and requires an ECU with internal ignition drivers.

Product Highlights

Features

  • Max. 33 kV
  • Min. 65 mJ
  • Connection for high voltage wire
  • Max. 10,000 1/min (with reduced dwell time)
  • Developed for GDI engines

Downloads

Literature

Product Details

Spark energy
≥ 65 mJ
Spark energy
Primary current
≥ 65 mJ
≤ 7.0 A
Spark energy
Operating temperature range at outer core
≥ 65 mJ
-40 to 140°C
Spark energy
Storage temperature range
≥ 65 mJ
-40 to 140°C
Spark energy
Max. vibration
≥ 65 mJ
≤ 250 m/s2at 5 to 2,000 Hz
Mechanical Data
Mechanical Data
Length
83 mm
Mechanical Data
Weight
210 g
Mechanical Data
Mounting
Screw fastening
Electrical Data
Electrical Data
Primary resistance with wire
Incapable of measurement
Electrical Data
Secondary resistance
Incapable of measurement
Electrical Data
High voltage rise time
≤ 1.4 kV/µs
Electrical Data
Max. high voltage at
≤ 33 kV
Electrical Data
Spark current
≤ 70 mA
Electrical Data
Spark duration at 1 kV || 1 MOhm
≤ 1.85 ms
Electrical Data
Noise suppression
Inductive and 1 kOhm resistance
Electrical Data
Integrated suppression diode / EFU
Electrical Data
Integrated power stage
Characteristic
Characteristic
Measured with power stage
BIP 385
Connectors and Wires
Connectors and Wires
Connector primary side
Tyco 0-1488991-1
Connectors and Wires
Mating connector primary side
F02U.B00.555-01
Connectors and Wires
Pin 1
ECU ignition signal
Connectors and Wires
Pin 2
ECU GND
Connectors and Wires
Pin 3
Ubatt
Connectors and Wires
30 kV grid connector
See Accessories
Characteristic dwell times [ms]
Characteristic dwell times [ms]
U batt
I primary
Characteristic dwell times [ms]
5.0 A
5.5 A
6.0 A
6.5 A
7.0 A
7.5 A
Characteristic dwell times [ms]
Max.
1000
/min
10
9
8
7
6
5
Characteristic dwell times [ms]
6 V
10.7
11.6
Characteristic dwell times [ms]
8 V
4.7
5.4
6.8
8.3
10.2
Characteristic dwell times [ms]
10 V
3.1
3.55
4.25
4.87
5.6
6.3
Characteristic dwell times [ms]
12 V
2.32
2.66
3.12
3.51
3.94
4.36
Characteristic dwell times [ms]
14 V
1.86
2.1
2.45
2.75
3.07
3.36
Characteristic dwell times [ms]
16 V
1.55
1.77
2.03
2.26
2.51
2.73
Characteristic dwell times [ms]
16.5 V
1.49
1.7
1.95
2.17
2.40
2.61
Characteristic dwell times [ms]
18 V
1.34
1.51
1.73
1.92
2.13
2.31
Characteristic dwell times [ms]
20 V
1.16
1.33
1.51
1.67
1.85
2.0
Characteristic dwell times [ms]
24 V
0.93
1.05
1.19
1.32
1.45
1.57
Characteristic dwell times [ms]
Measured values are without loom resistance. Loom resistance must be less than the primary resistance. The needed dwell time is to be verified through current measurement
Dwell time
Spark energy and provided high voltage
Spark energy and provided high voltage
I prim.
Spark energy
-duration
-current
Hi voltage
Spark energy and provided high voltage
5 A
33.7 mJ
1.37 ms
50 mA
24.4 kV
Spark energy and provided high voltage
5.5 A
42 mJ
1.54 ms
54 mA
27.0 kV
Spark energy and provided high voltage
6 A
48.9 mJ
1.62 ms
59 mA
29.1 kV
Spark energy and provided high voltage
6.5 A
55.9 mJ
1.74 ms
63 mA
31.2 kV
Spark energy and provided high voltage
7 A
63.6 mJ
1.85 ms
68 mA
33.2V
Spark energy and provided high voltage
7.5 A
71.9 mJ
1.92 ms
73 mA
34.7 kV
Spark Energy
See Offer Drawing for further information

Further Information

During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug (high voltage wire).
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug (high voltage wire).
The coil P65-T has an integrated transistor and requires an ECU with internal ignition drivers with 10 to 20 mA current output.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug (high voltage wire).
For technical reasons the values of the coils may vary.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug (high voltage wire).
Please regard the specified limit values.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug (high voltage wire).
Please find further application hints in the offer drawing at our homepage.
During mounting of the spark plug please pay attention that full clamping and proper contacts are made to ensure safe connection between coil and spark plug (high voltage wire).
In case of ignition-caused malfunctions, please use screened sensor wires.
Design Note
Design Note
We strongly recommend the design of the spark plug shaft has to ensure that there are no sharp edges in the shaft geometry due to design or machining. Only in compliance with this recommendation, a proper function can be ensured.

Ignition Coil P65-TWG
Order number: F02U.V02.429-01

Generally blocked are direct and indirect business involving high risk destinations, including Russia, Belarus, Cuba, Iran, North Korea, Syria, Libya, Afghanistan, and certain non-governmental controlled Ukrainian regions. This list may change as geopolitics evolve.