The injector power stage HPI 5 is a device for driving injectors and high pressure pumps for gasoline direct injection. Combined with a suitable ECU up to 8 injectors can be driven. The injectors are gathered in 4 groups of 2 injectors each. Within a group only one injector can be switched on at the same time. The 4 groups are totally independent, so that overlapping injection of injectors of different groups is possible. The HPI 5 is mainly designed to drive the Bosch high pressure pump HDP 5. Communication between main ECU and the HPI 5 is realized via CAN interface.
- Downloads
- Features
- Application
- Technical Specifications
- Communication
- Ordering Information
- Legal Restrictions
Downloads
Features
- Max. 8 cylinders
- Max. 14,000 rpm (4 cyl. operation)
- 550 g
Application
|
Max. number of cylinders |
8 |
|
Max. rpm (8 cyl. operation) |
7,000 |
|
Max. rpm (4 cyl. operation) |
14,000 |
Technical Specifications
Mechanical Data
Aluminum housing | |
Each connector pin individually filtered | |
Housing temperature | -25 to 85°C |
Size (incl. connectors) | 190 x 123 x 36 mm |
Weight | 550 g |
Electrical Data
Voltage supply | 14 V |
Operating voltage | 10 to 16 V |
Operation voltage (engine start) | 6.5 to 16 V |
Nominal voltage | 14 V |
Connectors and Wires
Mating connector | D261.205.353-01 |
Communication
|
1 CAN (1 Mbaud) |
|
Ordering Information
Injection Power Stage HPI 5
Optimized for Bosch HDP 5
Order number: F02U.V00.929-02
Legal Restrictions
The sale of this product in Mexico is prohibited.
Due to embargo restrictions, sale of this product in Russia, Belarus, Iran, Syria, and North Korea is prohibited.