Zum Hauptinhalt springen

Engine Control Unit MS 7.8

Engine Control Unit MS 7.8

The MS 7.8 engine control unit manages gasoline engines up to 12 cylinders. The MS 7 line features a powerful digital processing core with floating point arithmetic and a high-end FPGA for ultimate performance and flexibility. The MS 7 line utilizes a software development process based on MATLAB/Simulink which significantly speeds up algorithm development by using automatic code and documentation generation. Custom functions can be generated quickly and easily. The flexible hardware design allows the MS 7.8 to support complex or unusual engine or chassis configurations.

Version MS 7.8-ADV was developed for use with Lambda Sensor LSU ADV (higher max. Hexagon temperature).

Product Highlights

Features

  • Optimized for low- and high-pressure injection
  • 5 CAN, 3 of them CAN-FD capable
  • 4 x 8.5 A H-Bridge
  • Gearbox control optionally included
  • SENT sensor support

Downloads

To get latest firmware, please contact your customer account manager or send an email to motorsport@bosch.com


Literature

Product Details

High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
HP package for flat and V-engines inclusive (2nd Bank, fuel control valve 2, external cylinder 9-12)
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Low pressure injection
  • Max. 12 cylinders up to 16,000 rpm, high impedance injectors only
Outputs can be used alternatively as low side switches 2.2 A with fast decay
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Ignition
  • 8 integrated power stages up to 20 A
  • alternatively, up to 12 drivers for use with external power stages
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Physical engine model for fast application
  • determine engine load by throttle position or air pressure signals
  • mixture control and basic ignition guided by main signal relative load rl
  • Subsystems pit speed-, launch-, rpm-limiter and ASR are integrated inside torque control
  • Separated power cut functions to assist several gear cut systems
  • Diagnostics
  • Integrated safety strategy for 2 electronic throttle controls
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Integrated support of manual gearshift
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Electronic throttle control
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Variable Valve Timing VVT
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Turbo control
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Traction control
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Launch control
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
LTE Ethernet telemetry support
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Internal logger
  • FULL_LOG_1 (4 GB memory on Partition 1) enabled
  • PERF_LOG_1 (16 GB memory on Partition 1) optional
  • FULL_LOG_2 (4 GB memory on Partition 2) enabled
  • DATA_USB (Data copy to USB flash drive) enabled
High pressure injection
Integrated power stages for triple injection and use of:
  • 4 cylinders up to 14,600 rpm
  • 6 cylinders up to 9,700 rpm
  • 8 cylinders up to 7,300 rpm
(for supply voltages >10 V, depending on injection types and pressure ranges)
Logging rates
  • Usage of all features: 400 kB/s
  • Primary logging use case: >800 kB/s
  • Logging data download rate: up to 6.2 MB/s
Mechanical Data
Mechanical Data
Milled aluminum housing
Mechanical Data
4 motorsport connectors, 264 pins in total
Mechanical Data
Size without connectors
198 x 180 x 42 mm
Mechanical Data
Weight
1,560 g
Mechanical Data
Protection Classification
IP67
Mechanical Data
Temp. range (at internal sensors)
-20 to 85°C
Mechanical Data
Max. Vibration
Vibration Profile 1 (see Downloads or www.bosch-motorsport.com)
Electrical Data
Electrical Data
Power supply
6 to 18 V
Electrical Data
CPU
Dual Core 1 GHz, FPGA
Inputs
Inputs
46 analog inputs
8 analog/digital/SENT inputs (shared)
12 digital inputs
12 digital inputs
4 x switchable Hall/inductive
12 digital inputs
4 x Hall
12 digital inputs
4 x switchable Hall/DF11
21 internal measurements
21 internal measurements
8 x ECU Current (Sensor Supply)
21 internal measurements
8 x ECU Voltage (Sensor Supply)
21 internal measurements
1 x Boost Voltage
21 internal measurements
1 x Booster Supply Voltage
21 internal measurements
1 x Dynpwr Supply Voltage
21 internal measurements
1 x Supply Current
21 internal measurements
1 x USB Current
18 function related inputs
18 function related inputs
8 x fast ADC for combustion chamber pressure input
18 function related inputs
2 x thermocouple exhaust gas temperature sensors (multi-type)
18 function related inputs
2 x Lambda interfaces for LSU 4.9 sensor types (LSU-ADV version available, see Ordering Information)
18 function related inputs
1 x digital switch for engine ON/OFF
18 function related inputs
1 x digital input for beacon receiver
18 function related inputs
4 x knock sensors
Sensor supplies and screens
Sensor supplies and screens
8 x sensor supply 400 mA, switchable 5 V/Vbat with voltage and current sensing
Sensor supplies and screens
8 x sensor grounds
Sensor supplies and screens
2 x sensor screens
Outputs
Outputs
38 function related outputs
Outputs
High Pressure Injection
Outputs
2 x high pressure pump with fuel control valve
8 x high pressure injection for magnetic injectors
Outputs
Low Pressure Injection
Outputs
12 x 2.2 A low pressure injection for high impedance injectors
Outputs
Ignition
Outputs
12 x ignition control, IGBT or BJT, coils with integrated power stage, or max. 8 cylinders and coils without integrated power stage, 20 A
Outputs
2 x 8.5 A H-bridge reserved for electronic throttle
Outputs
2 x 3 A pwm lowside switch for Lambda heater
15 freely configurable outputs
15 freely configurable outputs
2 x 8.5 A H-bridge
15 freely configurable outputs
2 x 4 A pwm lowside switch
15 freely configurable outputs
6 x 3 A pwm lowside switch
15 freely configurable outputs
4 x 2.2 A pwm lowside switch
15 freely configurable outputs
1 x 1 A pwm lowside switch low dump resistant
5 output signals
5 output signals
5 x MUX outputs for internal signals like flywheel, knock signals, cylinder pressure
Adaptation and Documentation
Adaptation and Documentation
Configuration
Configurable flywheel- and trigger disc geometries
Selectable links between functions and in- or outputs
Adaptation and Documentation
Function documentation
Automatically created during code generation
Adaptation and Documentation
MatLab code generation
Support for customer own MatLab function development
Software Tools (free download)
Software Tools (free download)
Data Analysis tool WinDarab V7
Software Tools (free download)
System Configuration tool RaceCon 2.7.0.9 or later
Mating Connectors
Mating Connectors
LIFE (red)
AS618-35SN
Mating Connectors
Actuator (blue)
AS618-35SB
Mating Connectors
Combined (orange)
AS618-35SC
Mating Connectors
Sensor (yellow)
AS618-35SA
See Offer Drawing for further information

Further Information

1 Ethernet 1 Gbit
1 Ethernet 1 Gbit
3 Ethernet 100 Mbit
1 Ethernet 1 Gbit
5 CAN, 3 of them CAN-FD capable
1 Ethernet 1 Gbit
1 LIN
1 Ethernet 1 Gbit
1 USB
1 Ethernet 1 Gbit
8 SENT
1 Ethernet 1 Gbit
1 Time sync synchronization Ethernet
1 Ethernet 1 Gbit
2 Network screens
Inspection services recommended after 220 h or 24 months, internal battery to be replaced during service.
Inspection services recommended after 220 h or 24 months, internal battery to be replaced during service.
Depending on your experiences with calibration of ECUs we recommend calibration support from Bosch Motorsport.
Inspection services recommended after 220 h or 24 months, internal battery to be replaced during service.
Please remember that the mating connectors and the programming interface cable are not included and must be ordered separately.

Engine Control Unit MS 7.8
Order number: F02U.V03.249-02

Engine Control Unit MS 7.8-ADV
Order number: F02U.V03.316-02

Rugged USB flash drive
Order number: F02U.V03.534-01

Connector for USB flash drive on car loom side
Order number: F02U.002.996-01

Adapter cable to PC USB-Port
Order number: F02U.V01.343-01

Software Options

CCA Hardware Upgrade per device
Order number: F02U.V02.137-01

PERF_LOG_1
Order number: F02U.V03.054-01

Gear Control Package 1
Order number: please contact MEGA-Line

Gear Control Package 2
Order number: F02U.V02.264-01

Cylinder pressure detection base package
Order number: F02U.V02.543-01

Knock detection via cylinder pressure evaluation
Order number: F02U.V02.544-01

Accessories

Breakout Box BOB 66-pole, Connector code blue
Order number: F02U.V02.295-01

Breakout Box BOB 66-pole, Connector code orange
Order number: F02U.V02.296-01

Breakout Box BOB 66-pole, Connector code yellow
Order number: F02U.V02.298-01

Breakout Box BOB MS 7, LIFE-Connector code red
Order number: F02U.V02.293-02

Programming interface cable
Order number: F02U.V02.327-01

CCA Hardware Upgrade per device
CCA Hardware Upgrade per device
Enable Customer Code Area
PERF_LOG_1
PERF_LOG_1
Increase logging Partition 1 from 4 GB to 16 GB memory
Gear Control Package 1
Gear Control Package 1
Gear control MEGA-Line functionality, has to be used with MEGA-Line components (License model via MEGA-Line)
Gear Control Package 1
-- Link to MEGA-Line Support Request --
Gear Control Package 1
-- Link to MEGA-Line License Request Form --
Gear Control Package 2
Gear Control Package 2
Gear control Bosch Motorsport functionality
Accessories
Accessories
  • Rugged USB flash drive
  • Mating connector for USB flash drive on car loom side
  • Adapter cable to PC USB-Port
  • Cylinder pressure detection base package
  • Knock detection via cylinder pressure evaluation
  • Programming interface cable

Generally blocked are direct and indirect business involving high risk destinations, including Russia, Belarus, Cuba, Iran, North Korea, Syria, Libya, Afghanistan, and certain non-governmental controlled Ukrainian regions. This list may change as geopolitics evolve.